Gas-filled discharge capillaries are widely used in the field of plasma-based particle accelerators, due to their compactness, cost-effectiveness and versatility for different applications. Technological improvement of such plasma sources is necessary to enable high energy gain acceleration at the meter scale, as required for next-generation particle colliders and light sources. Beam quality preservation within such an acceleration length involves accurate tuning of the plasma properties. In particular, precise tailoring of the plasma density distribution is required to control the emittance growth of particle bunches during the acceleration process. In this context, this paper presents a scalable and versatile approach for the design of meter-scale discharge capillaries, aimed at achieving fine tuning of the plasma density distribution, with the possibility of locally controlling the density profile by acting on the source geometry. Forty-centimeter-long capillaries are designed using numerical fluid dynamics simulations and tested in a dedicated plasma module. Different arrangements of the gas inlets are tested, with their number and diameter varied, to assess the effect of the capillary geometry on the plasma properties. Plasma density measurements show that a higher number of inlets with variable diameter along the plasma formation channel provides an enhancement in the homogeneity of the electron plasma density distribution. Longitudinal density plateaus are observed along most of the plasma channel length, with a center-to-end density uniformity of up to 80%. The experimental results highlight the proposed approach’s capability to modulate the longitudinal plasma density distribution by acting on the capillary geometry, thus providing uniform density profiles over the meter scale, as required for plasma-based acceleration experiments.
Crincoli et al. (Sat,) studied this question.