Field observations show reduced performance criteria for anchors enhance cost-effectiveness in offshore installations, indicating significant design improvements.
Drag-embedded anchors (DEAs) are widely used for offshore floating facilities due to high-capacity efficiency and cost-effective installation. However, the installation of modern floating energy systems is constrained by design line tensions that often exceed 1000 t per line, while most anchor-handling vessels are limited to about 500 t. These limitations, combined with uncertainties in embedment behaviour and capacity mobilisation, have led to overly conservative design practices. This study provides prototype-scale field evidence on DEA installation performance in sandy and clayey seabeds, addressing the scarcity of full-scale data. The observations show that anchor embedment stabilises within the first few minutes, indicating that the conventional 15–30 min hold period is unnecessarily conservative. Shorter, performance-based criteria could therefore reduce vessel time, costs and operational risk. Furthermore, modelling with a coupled mooring line–anchor framework, validated against field observations, demonstrates that anchors installed at reduced initial tension can mobilise additional capacity through post-installation drag, reducing installation demands and risks. Parametric studies further reveal how soil layering, mooring configuration and installation tension influence post-installation embedment and resistance. The combined insights inform more cost-effective and operationally efficient anchoring system installations, supporting improvements to offshore anchoring guidelines and design practices.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: