Answers are grounded in this paper and cite their sources.
This paper proposes a novel packaging and large-scale antenna-assembled structure for a printed circuit board (PCB) that reinforces productivity, facilitates cost reduction, and maintains reliability. This was achieved by splitting the antenna from the main board and packaging it into a radio-frequency integrated circuit. In addition, two innovative solutions—an externally attachable flexible PCB antenna and a PCB-embedded coaxial line—are introduced to overcome the degradation in antenna performance and vertical RF transition loss in the proposed low-cost hybrid PCB. First, the proposed externally attachable flexible PCB antenna and a parasitic aircoupled antenna, which were easily assembled on the PCB, achieved an antenna efficiency of 95% and an impedance bandwidth of 7 GHz. Second, the fabricated coaxial line exhibited enhanced impedance matching over a wide frequency range of 30–40 GHz and improved insertion loss of approximately 1.4 dB. Furthermore, the packaged antenna, composed of 256 dual-polarized antenna elements per stream, incorporated a 39 GHz CMOS-based 16-channel phased-array transceiver IC. The set-level beam-forming measurements were verified considering an effective isotropic radiated power of 55 dBm at boresight and a steering range >±60°. In addition to being suitable for mass production in terms of cost and reliability, the proposed structures and solutions met the required antenna and beam-forming performance for commercial 39 GHz base stations without sacrificing performance.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: