Answers are grounded in this paper and cite their sources.
• Characteristic Raman peak of intergranular corrosion is 1492 cm −1 . • The sensitized weld revealed higher degree of intergranular corrosion. • The higher the degree of corrosion, the stronger the characteristic peak intensity. • Raman mapping provides a quantitative method for intergranular corrosion detection. Composition and intergranular corrosion characteristics of 304 austenitic stainless steel before and after sensitization were studied by inductively coupled plasma (ICP), X-ray diffraction (XRD) and Raman spectroscopy. Chromium content in the matrix and weld components revealed an evidenced decrease by 39.41 % and 95.26 % respectively after sensitization treatment. The characteristic peak at 1492 cm −1 by Raman spectroscopy was related to the Fe 2+ presence with consideration of the intergranular corrosion (Fe-2e→Fe 2+ ). In comparison, the weld part after sensitization treatment revealed a higher intensity of such characteristic peak than the unsensitized part. In addition, Raman mapping results at 1492 cm −1 revealed that the most severe corrosion occurred in the areas with higher precipitate concentrations within the sensitized weld region.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: