Answers are grounded in this paper and cite their sources.
This study is aimed at determining the interfacial adhesion strength (IAS) of kenaf fibres using different chemical treatments in hydrochloric (HCl) and sodium hydroxide (NaOH) with different concentrations. Single fibre pullout tests (SFPT) were carried out for both untreated and treated fibres partially embedded into three different polymer matrices; polyester, epoxy, and polyurethane (PU) as reinforcement blocks and tested under dry loading conditions. The study revealed that kenaf fibres treated with 6% NaOH subjected to polyester, epoxy, and PU matrices exhibits excellent IAS while poor in acidic treatment. The effect of SFPT results was mainly attributed to chemical composition of the fibres, types of fibre treatments, and variation in resin viscosities. By scanning electron microscopy examination of the material failure morphology, the fibres experienced brittle and ductile fibre breakage mechanisms after treatment with acidic and alkaline solutions.
No takes yet. Share an insight, caveat, or question.
Nirmal et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: