Answers are grounded in this paper and cite their sources.
Many machines and vehicles are designed to be operated in every possible environment and climate around the world. This also includes operation in cold environments, such as frozen food processing or arctic climates with temperatures of up to −60 °C. The behavior of radial shaft seals in subzero conditions is not yet fully understood and investigated. However, the literature available on the topic suggests a significantly different behavior of the seals at cold temperatures, especially at cold start conditions. Increased wear, in case of cold starts, also an increased breakaway torque due to freezing of the seal lip and leakage due to limited followability of the rubber around and below the glass transition temperature against shaft displacements were reported. In this article, a test bench and automatic evaluation method for investigating the seals’ followability against such static and dynamic shaft displacements at temperatures of up to −40 °C are introduced. The measurements of the followability of seals made of two rubber materials against displacements with various amplitudes and frequencies at a wide subzero temperature range are to be presented. Results show that the limits for shaft runout given in various standards for radial shaft seals are too high at cold temperatures.
No takes yet. Share an insight, caveat, or question.
Schollmayer et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: