Answers are grounded in this paper and cite their sources.
Recent studies on very high cycle fatigue (VHCF) have observed a unique fracture surface with a fine granular area around the crack origin that arises from long-term repeated contacts of fracture surfaces (over 107 cycles). A fine microstructure including nanocrystalline is known to form in the matrix just beneath the fracture surface. Focusing on these phenomena, this study devised a new surface modification technique, called Cyclic Press (CP), that creates a nanocrystalline layer using cyclic compressive loading. Repeated low-compression loadings were applied to the surfaces of SNCM439 high-strength steel and ADC12 die-cast aluminum alloy with an indenter for 5 × 107 cycles. Then, the surfaces and cross sections were analyzed by using a laser microscope, a scanning electron microscope, a scanning ion microscope, and energy dispersive X-ray spectrometry (EDS). As a result, a nanocrystalline structure very similar to that of the cross section beneath the fracture surface in the VHCF regime clearly formed in the surface layer of both materials. Additionally, an oxygen-rich layer formed at the surface of the CP-treated ADC12. This result was considered to be caused by diffusion of elemental oxygen in the atmosphere by a huge number of repeated contacts between the indenter and specimen. Overall, the results indicate that CP is a useful technique for forming nanocrystalline layers in metal surfaces and can also be expected as a new method for diffusing surrounding gaseous elements into surfaces at room temperature.
No takes yet. Share an insight, caveat, or question.
FUJIMURA et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: