This is the authors' abstract. We don't add key points for this paper.
Single- and multi-core MgB 2 wires have been fabricated by an internal Mg diffusion (IMD) process. Wires uniformity after drawing and/or rolling deformation has been studied by optical microscopy and x-ray micro-tomography. Several short samples taken lengthwise between both ends of the wire were annealed and their critical current measured. It was found that I c of the single-core barrier-free MgB 2 /Fe wire with high fill factor (32.5% of MgB 2 ) vary by 100% towards the averaged I c . Multi-core wire having ∼15.0% of MgB 2 and Cu outer sheath shows better uniformity with 25% deviation of I c over the 10 m length, which is still quite low and needs some improvements. It is expected, that improved in-length uniformity can be reached only for filamentary IMD wires with optimized deforming process and mechanically stronger outer sheath.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kováč et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: