Comparison of turbulent boundary layers over smooth and rough surfaces up to high Reynolds numbers

Turbulent boundary layer measurements above a smooth wall and sandpaper roughness are presented across a wide range of friction Reynolds numbers, δ₉₉⁺ , and equivalent sand grain roughness Reynolds numbers, kₛ⁺ (smooth wall: 2020 δ₉₉⁺ 21\,430 , rough wall: 2890 δ₉₉⁺ 29\,900 ; 22 kₛ⁺ 155 ; and 28 δ₉₉⁺/kₛ⁺ 199 ). For the rough-wall measurements, the mean wall shear stress is determined using a floating element drag balance. All smooth- and rough-wall data exhibit, over an inertial sublayer, regions of logarithmic dependence in the mean velocity and streamwise velocity variance. These logarithmic slopes are apparently the same between smooth and rough walls, indicating similar dynamics are present in this region. The streamwise mean velocity defect and skewness profiles each show convincing collapse in the outer region of the flow, suggesting that Townsend’s ( The Structure of Turbulent Shear Flow , vol. 1, 1956, Cambridge University Press.) wall-similarity hypothesis is a good approximation for these statistics even at these finite friction Reynolds numbers. Outer-layer collapse is also observed in the rough-wall streamwise velocity variance, but only for flows with δ₉₉⁺ 14\,000 . At Reynolds numbers lower than this, profile invariance is only apparent when the flow is fully rough. In transitionally rough flows at low δ₉₉⁺ , the outer region of the inner-normalised streamwise velocity variance indicates a dependence on kₛ⁺ for the present rough surface.