Answers are grounded in this paper and cite their sources.
By in-situ transmission electron microscopy (TEM), we performed a detailed study on the electron-beam radiation damage to nanostructured silicon nitride thin-film process layers in a typical semiconductor NVM device. It was found that high-dose electron-beam radiation at 200 kV led to rapid degradation of silicon nitride process layers, i.e. thin-downing of nanostructured silicon nitride, inter-diffusion of O and N, the formation of bubble-like defects and segregation of N at neighbouring interfaces. Further detailed analysis revealed that radiation-induced modification in the microstructure and chemical composition of silicon nitride layers could be ascribed to the electron radiation induced knock-on damage and ionization damage. The radiation enhanced diffusion (RED) accounted for the continuous thin-down of the nitride process layer and the formation of bubble-like defects in thick nitride spacer process layers. The work well demonstrated the electron-beam sensitivity of nanostructured silicon nitride materials in the semiconductor devices, and thus may give useful information about electron-dose control during TEM failure analysis of the semiconductor devices containing nanostructured silicon nitride process layers.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: