This is the authors' abstract. We don't add key points for this paper.
With the increasing consideration of sustainability in infrastructure materials, both modified asphalt and warm-mix asphalt have received remarkable attention. However, little is known about characteristics of warm-mix styrene-butadiene-styrene (SBS) modified asphalt with foaming technique (FWMA-SBS). The present study is dedicated to optimizing fabrication of the FWMA-SBS binder and investigating the performance of the foamed SBS-modified asphalt mixture. To achieve desirable foaming characteristics, the FWMA-SBS binder is produced at foaming temperature of 130°C, water content of 2.0%, and air pressure of 0.55 MPa. The production temperature of the FWMA-SBS mixture is significantly lowered by 20°C compared to traditional SBS-modified asphalt mixture. It has demonstrated that engineering performance of FWMA-SBS binder coincides with the mixture. The FWMA-SBS mixture features better low-temperature cracking resistance and fatigue performance, while it exhibits lower rutting resistance and similar moisture stability in comparison with a traditional SBS-modified asphalt mixture. The sustainability assessment verifies that compared to conventional SBS-modified asphalt mixture, the production of 1 ton of FWMA-SBS mixture leads to energy savings of 9.8%, cost reduction of $1.81, and less energy associated with CO2 by 9.8%. The research accomplishments promote the utilization of the foamed SBS-modified asphalt, realizing the pavement sustainability from principles to practices.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: