Answers are grounded in this paper and cite their sources.
Solid solutions of mixed metal dodecaborides of ZrB12, YB12, and ScB12 were prepared by arc-melting and studied for their mechanical properties. Zr1–xYxB12 formed an essentially perfect solid solution, closely following Vegard’s law. Zr1–xScxB12 and Y1–xScxB12 undergo a face centered-cubic to body-centered tetragonal transition at 90–95 at. % Sc as determined by powder X-ray diffraction and transmission electron microscopy. The compounds Zr0.5Y0.5B12, Zr0.5Sc0.5B12, and Y0.5Sc0.5B12 are superhard (Vickers hardness ≥ 40 GPa) and demonstrate an increase in hardness to 45.8 ± 1.3, 48.0 ± 2.1, and 45.2 ± 2.1 GPa under a load of 0.49 N, respectively, compared to 40.4 ± 1.8, 40.9 ± 1.6, and 41.7 ± 2.2 GPa for pure ZrB12, YB12, and ScB12, respectively. In addition, Zr0.5Y0.5B12, Zr0.5Sc0.5B12, and Y0.5Sc0.5B12 solid solutions show a substantial increase in oxidation resistance to approximately 630, 685, and 695 °C, respectively, when compared to other superhard metal borides (e.g., ∼400 °C for WB4) and their alloys and the traditional cutting tools material tungsten carbide (∼400 °C). Moreover, Zr0.5Y0.5B12, Zr0.5Sc0.5B12, and Y0.5Sc0.5B12 have relatively low densities of 3.52, 3.32, and 3.18 g/cm3, respectively, comparable to or even lower than that of diamond (3.52 g/cm3) and significantly lower than those of other superhard borides such as ReB2 (12.67 g/cm3) and WB4 (8.40 g/cm3) and traditional cutting tools materials, e.g., WC (15.77 g/cm3), making them of potential interest for lightweight protective coatings and/or as materials for cutting and machining.
No takes yet. Share an insight, caveat, or question.
Akopov et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: