Answers are grounded in this paper and cite their sources.
Prehydration – the reaction between anhydrous cement and water vapour – has deleterious effects on engineering properties such as compressive strength, workability and setting time. This study assessed changes in the engineering properties of CEM I Portland cement exposed to relative humidities (RHs) of 60% or 85% for 7 and 28 days. Thin layers (no more than 2 mm thick) of CEM I 42.5R cement were exposed to controlled RHs of 60% and 85%, followed by assessment of compressive strength, setting time and workability. These measurements were complemented by characterising the prehydrated anhydrous cement using isothermal calorimetry, scanning electron microscopy, X-ray diffraction and thermal gravimetric analysis. Following prehydration at 60% RH, conventional hydration resulted in a negligible reduction in strength development plus a decrease in workability and increase in setting time. At 85% RH, compressive strength was greatly reduced, particularly at early ages. There was also a greater loss of workability and increase in setting time.
No takes yet. Share an insight, caveat, or question.
Whittaker et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: