Answers are grounded in this paper and cite their sources.
An improved Cu-Cu joint strength was achieved by a pressureless sintering bonding using microscale Cu particles with an oxidation-reduction process for power device packaging. After the bonding at 300 °C in air, Cu2O nanoparticles uniformly formed on the surface of microscale Cu particles through a thermal oxidation, and the formation of neck between microscale Cu particles was obvious. Then, after the following bonding at 300 °C in a reductive formic acid atmosphere, the Cu2O nanoparticle surface of microscale Cu particles was reduced to a Cu nanostructured surface, meanwhile the joining between the microscale Cu particles was facilitated by formed nanostructured surface, resulting a higher joint strength than that of the bonding joint with entire formic acid atmosphere process. The results demonstrate that the pressureless sintering bonding using microscale Cu particles by the oxidation-reduction process has the potential to fulfill the requirement of die-attach bonding for power device packaging.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2016) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: