This is the authors' abstract. We don't add key points for this paper.
A quantitative method for measuring the wettability of porous media containing brine and crude oil has been developed by the USBM using capillary pressure curves determined with a centrifuge. These measurements were reproducible within a standard deviation of 8.2 percent. The determination of fractional wettability has been compared with a method involving a combination of imbibition and displacement. Results are in agreement qualitatively as to whether a sample was water-wet or oil-wet. When tested with outcrop cores of Torpedo Sandstone, wetting tendencies of oils from widely different fields range from highly water-wet to almost neutral. Silicone-treated cores vary in extent of wettability in a predictable manner, becoming more oil-wet as the concentration of silicone used in core preparation is increased. Wettability, used as a parameter in designing linear mathematical models for predicting recovery efficiency, is equal in significance to viscosity and permeability. Introduction Wettability is one of the major factors that influences oil recovery. The importance of maintaining a water-wet condition in a field under water drive has been discussed by many authors. These authors have shown that oil recovery, as a function of the water injected, is greater from water-wet cores than from oil-wet cores. A few authors have indicated that recovery from strongly water-wet or oil-wet cores is less than recovery from cores that are at some intermediate wettability. One reason that the significance of wettability to oil recovery is still being evaluated is because a quantitative measurement of wettability has not been available when crude oil is involved.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Donaldson et al. (1969) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: