Answers are grounded in this paper and cite their sources.
The ineffective p-type doping of nitrides using magnesium (Mg), the best available dopant, has limited the development and performance of all III-nitride-based devices, including bipolar junction transistors and light emitting diodes (LEDs). For nitride-based ultraviolet (UV) LEDs, as the Al composition increases for achieving shorter wavelengths (e.g. <280 nm) into the UVC spectral range, the p-type doping issue, which causes very inefficient hole injection, becomes more severe than ever. In this work, we report the detailed study of using p-type Si as a hole supplier for high-Al composition UVC LEDs. We first describe the method of Si/GaN junction formation, where the lattice-mismatch challenge between Si and GaN is overcome by using a 0.5 nm thick Al _2 O _3 layer at the interface. This serves as a physical separation layer between the two materials as well as a passivation, tunneling, and thermal buffer layer. High-resolution transmission electron microscope image illustrates the high-quality interface between Si and GaN. We further detail the hole transport mechanism of the p–p Si/GaN isotype junction through both simulations and experiments. The enhanced hole concentration in the AlGaN/AlN multiple quantum wells (MQWs) due to the use of p-type Si as the hole supplier is verified through comparison with conventional UVC LEDs. Finally, high-performance UVC LEDs made with AlN/AlGaN (Al: 72%) MQWs employing p-type Si as their hole suppliers are demonstrated experimentally to serve as an example of the novel hole injector strategy.
No takes yet. Share an insight, caveat, or question.
Cho et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: