Answers are grounded in this paper and cite their sources.
Understanding the band bending at the interface of GaN/dielectric under different surface treatment conditions is critically important for device design, device performance, and device reliability. The effects of ultraviolet/ozone (UV/O₃) treatment of the GaN surface on the energy band bending of atomic-layer-deposition (ALD) Al₂O₃ coated Ga-polar GaN were studied. The UV/O₃ treatment and post-ALD anneal can be used to effectively vary the band bending, the valence band offset, conduction band offset, and the interface dipole at the Al₂O₃/GaN interfaces. The UV/O₃ treatment increases the surface energy of the Ga-polar GaN, improves the uniformity of Al₂O₃ deposition, and changes the amount of trapped charges in the ALD layer. The positively charged surface states formed by the UV/O₃ treatment-induced surface factors externally screen the effect of polarization charges in the GaN, in effect, determining the eventual energy band bending at the Al₂O₃/GaN interfaces. An optimal UV/O₃ treatment condition also exists for realizing the "best" interface conditions. The study of UV/O₃ treatment effect on the band alignments at the dielectric/III-nitride interfaces will be valuable for applications of transistors, light-emitting diodes, and photovoltaics.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: