It is difficult to effectively rectify or convert low power in the circuit stage of harvesters. The high-gain antenna can offer a higher level of power and is beneficial to RF power harvesting in a low power density environment. To extend the narrow beam of the conventional high-gain rectenna, the multiport and multibeam antenna is promising. To pursue a simple configuration and avoid extra beamforming networks, a travelingwave grid-array antenna (GAA) with two isolated ports and two symmetrically tilted beams is proposed. A prototype is designed and fabricated after a detailed analysis of the GAA with tilted beams and the coplanar stripline-based rectifier. The measured results show that the proposed rectenna is sensitive and effective in a wide-angle range. The harvesting angle range is extended by combining two tilted beams and can be greater than 70°, where the level of dc power exceeds 100 μW when the power density is as low as 1 μW/cm 2 . A maximum dc output of 3.6-203.8 μW and a maximum RF-to-dc conversion efficiency of 16.3%-45.3% are available at 2.45 GHz, under the condition that the power density ranges from 0.052 to 1 μW/cm 2 .
No takes yet. Share an insight, caveat, or question.
Hu et al. (2018) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: