Electromechanical Automation of Cable Specimen Preparation for Compliance Testing: System Design, Validation, and Performance Analysis Under IS 10810 and IS 7098

Shabbir Kataleri; Sahil Patil; Gauri Thite; Deven mane; Raghav Khandelwal; Riya More; Sandeep Kulkarni

doi:10.64643/ijirtv12i11-196451-459

April 8, 2026International Journal of Innovative Research in TechnologyOpen Access

Electromechanical Automation of Cable Specimen Preparation for Compliance Testing: System Design, Validation, and Performance Analysis Under IS 10810 and IS 7098

View Full Paper

Ask AI

Bookmark

Share

Key Points

To design and validate an automated system for preparing cable specimens for compliance testing under specific standards.
Developed an electromechanical automation system for specimen preparation.
Validated the system against IS 10810 and IS 7098 standards.
Performed performance analysis to assess effectiveness.
Achieved efficient specimen preparation compared to manual methods.
Met compliance testing requirements outlined in relevant standards.

Ask about this paper

Answers are grounded in this paper and cite their sources.

Implication

Evaluates system design for automating cable specimen preparation in compliance testing, implying improved efficiency.

Abstract

Explore the article titled Electromechanical Automation of Cable Specimen Preparation for Compliance Testing: System Design, Validation, and Performance Analysis Under IS 10810 and IS 7098 from IJIRT Volume 12, Issue 11. This study evaluates the effectiveness of teaching programs on waste management knowledge among women.

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Kataleri et al. (2026) studied this question.

synapsesocial.com/papers/69d9e57078050d08c1b75a64 https://doi.org/10.64643/ijirtv12i11-196451-459

View Full Paper

Ask AI

Bookmark

Share

Electromechanical Automation of Cable Specimen Preparation for Compliance Testing: System Design, Validation, and Performance Analysis Under IS 10810 and IS 7098

Key Points

Ask about this paper

Implication

Abstract

Discussion

Cite This Study

Electromechanical Automation of Cable Specimen Preparation for Compliance Testing: System Design, Validation, and Performance Analysis Under IS 10810 and IS 7098

Key Points

Ask about this paper

Implication

Abstract

Discussion

Cite This Study

Keep reading

Keep reading