Key points are not available for this paper at this time.
ABSTRACT The majority of materials used for short‐term and disposable packaging application are non‐biodegradable which are not satisfying the demands in environmental safety and sustainability. Biodegradable polymers are an alternative for these non‐biodegradable materials. The biodegradable polymeric materials can degrade in a reasonable time period without causing environmental problems. However, biodegradable polymers possess some limitations such as comparatively high cost, insufficient mechanical performances, and inferior thermal stability to extend their widespread application in packaging industry. To overcome these limitations, one of the most commonly used strategies is melt blending of dissimilar biodegradable polymers. Unfortunately, most of the biodegradable polymer blends exhibit insufficient performance because they are thermodynamically immiscible as well as exhibit poor compatibility between the blended components. It has been established that the compatibilization is a well‐known strategy to improve the performances of the immiscible biodegradable polymer blends by enhancing the adhesion between the phases. As a result, recent studies focus on various compatibilizers to enhance the performances of the resulting biodegradable polymer blends. This review summarizes the recent developments on a variety of biodegradable polymer blends compatibilized by melt processing with a main focus of ex situ and in situ compatibilization strategies. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135 , 45726.
Muthuraj et al. (Thu,) studied this question.