Answers are grounded in this paper and cite their sources.
According to both scientific papers and sector studies, airborne wind energy systems (AWESs) have the potential to provide large-scale, sustainable, and economically viable electricity production. In this work, we consider a pumping AWES with a rigid wing and vertical takeoff and landing (VTOL) capability with onboard propellers. In fully autonomous operation, the system must be able to handle the complete wind range from cut-in to cut-out. In case of too low wind speeds for a relatively short time or if the power output needs to be curtailed following possible grid operator commands, the system shall be able to switch to a “standby mode”, where the kite remains airborne until the wind increases again or the power output is increased again. In the literature, there are a few studies on such an operational mode, which is referred to as “reverse pumping”, and none on the design of a feedback control system that is able to obtain reliably a large-scale reverse pumping maneuver. The main contribution of this paper is a hierarchical, automatic control approach to achieve reverse pumping operation for AWES with a tether length of the order of hundreds of meters while at the same time being relatively easy to implement and tune.
No takes yet. Share an insight, caveat, or question.
Mohammed et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: