This is the authors' abstract. We don't add key points for this paper.
Aluminum doped zinc oxide (ZnO:Al) films were deposited on (112̄0) oriented sapphire substrates heated to 200 °C with a radio-frequency (rf) power ranging from 25 to 170 W for a deposition rate in the range 0.7–27.4 nm min−1 by rf-magnetron sputtering from a ZnO target mixed with Al2O3 of 2 wt. %. All of the films deposited were (0001) oriented single-crystalline films with an internal stress. The stress was increased and degraded the crystallinity of the epitaxial film as a deposition rate was increased, and thus the Hall mobility and the resistivity of the film were, respectively, decreased and increased. However, the resistivities obtained were in the range about 1.4–3.0×10−4 Ω cm, the values comparable to those for indium tin oxide film presently used as a transparent electrode.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Igasaki et al. (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: