This is the authors' abstract. We don't add key points for this paper.
The influence of controlled porosity on the compression strength of sintered pure alumina and of partly magnesia‐stabilized zirconia was investigated. Bodies with porosities ranging from approximately 3 to 60% by volume were prepared utilizing hydrogen peroxide to induce pore formation. Cubes of approximately 1.2‐cm, unit length were used in testing for compression strength at room temperature. The spatial arrangement of pores in sintered alumina was found to exert an influence, inasmuch as bodies with pores lined parallel to the pressure direction revealed a higher strength than bodies of the same porosity but with pores lined mainly perpendicular to this direction. It was found that an increase of porosity by 10 volume % decreased the strength of both sintered alumina and sintered zirconia by half of their initial respective values.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Eugene Ryshkewitch (1953) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: