Answers are grounded in this paper and cite their sources.
Hydrogen sulfide (H2S), a corrosive and toxic gas, when present in produced fluids such as condensate, gas and water, poses serious health and operational hazards. Non-regenerable H2S scavengers have been in use for H2S removal from sour gas and condensate for over a decade. Selection of an appropriate non-regenerable chemistry is dictated by the downstream treatment processes that the gas or condensate will be subjected to after H2S removal is accomplished. Successful selection and application of non-regenerable H2S scavengers requires a thorough evaluation of operating conditions such as temperature, pressure, mixing, etc., that affect H2S removal from sour fluids. Most of the applications require on-site optimization to achieve maximum scavenging performance. This paper presents results and observations from a field trial for sweetening a large volume of sour condensate held in a 70,000 bbl storage tank using a water-soluble triazine-based scavenger. Mode of application of the triazine-based scavenger was found to be one of the most important factors for successful reduction of H2S in liquid hydrocarbons held in large tanks. Another important factor affecting H2S scavenger performance was the presence of sulfide species other than H2S in the sour fluid. Experiences gained from the trial illustrate the importance of a systematic approach required for effective sweetening in liquid hydrocarbons.
No takes yet. Share an insight, caveat, or question.
Salma et al. (2001) studied this question.