Answers are grounded in this paper and cite their sources.
Herein, we introduce a simple fabrication method of the Ag paste for low-temperature sintering for die-attachment of WBG power electronics. Silver nanoparticles (Ag NPs) were chosen for the die-attachment materials for their superior electrical and thermal conductivity and capability of low-temperature sintering driven by nano-sized structures. Ag paste was fabricated by simply mixing Ag NPs with general organic solvents without any organic additives. The optimal composition of the Ag paste was selected with 2-butoxyethanol as a solvent and the Ag content with 70 wt. %. The optimized Ag paste showed good processability to the screen-printing method with a low-roughness surface without visible cracks. We obtained a superior shear strength of 55.5 MPa with fast sintering for 150 s at 180 °C. Despite the low sintering temperature and short holding time, Ag NPs could be rapidly melted and densified due to their large surface areas and low-temperature decomposable organic ligands around the Ag NPs. Dense Ag joint also exhibited low porosity under 6 % leads to robust structures. Based on these results, we confirm that our low-temperature sinterable Ag paste has the potential as a promising material for die-attachment of WBG power electronics.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: