Answers are grounded in this paper and cite their sources.
A supercritical CO2 foam pilot, comprised of a central injection well in an inverted 5-spot pattern, was implemented in September 2013 in Salt Creek field, Natrona County WY. In this paper we present a thorough analysis of the pilot performance data that has been collected to date from the field. A monitoring plan was developed to analyze the performance of the pilot area wells before and after the start of the foam pilot. The injection well tubing head pressure was controlled to maintain a constant bottom hole pressure and the fluid injection rates were monitored to capture the effect of foam generation on injectivity. Inter-well tracer studies were performed to analyze the change in CO2 flow patterns in the reservoir. Production response was monitored by performing frequent well tests. The CO2 injection rate profile monitored over several WAG cycles during the course of the implementation clearly indicates the formation and propagation of foam deep into the reservoir. CO2 soluble tracer studies performed before and after the start of the foam pilot indicate significant areal diversion of CO2. The production characteristics of the four producing wells in the pilot area indicate significant mobilization of reservoir fluids attributable to CO2 diversion in the pattern. The produced gas-liquid ratio has decreased in all four of the producing wells in the pattern. Analysis of the oil production rates shows a favorable slope change with respect to pore volumes of CO2 injected. Segregation of CO2 and water close to the injection well seems to be the primary factor adversely affecting CO2 sweep efficiency in the pilot area. Foam generation leads to a gradual expansion of the gas override zone. The gradual expansion of the gas override zone seems to be the principal mechanism behind the production responses observed from the pilot area wells.
No takes yet. Share an insight, caveat, or question.
Mukherjee et al. (2016) studied this question.