Answers are grounded in this paper and cite their sources.
Lithium solid‐state batteries (Li‐SSBs) require electrodes that provide a sufficiently stable interface with the solid electrolyte. Due to the often limited stability window of solid electrolytes, researchers frequently favor an In−Li alloy instead of lithium metal as counter electrode for two‐electrode measurements. Maintaining a stable potential at the counter electrode is especially important because three‐electrode measurements are hard to realize in solid‐state cells. Although a constant potential of about 0.6 V vs. Li + /Li is commonly accepted for the In−Li electrode, only little is known about the behavior of this electrode. Moreover, the In−Li phase diagram is complex containing several intermetallic phases/compounds such as the InLi phase, or line compounds such as In 4 Li 5 or In 2 Li 3 . This means that the redox potential of the In−Li electrode depends on the alloy composition, i. e. the In/Li ratio. Here, we study the behavior of In−Li electrodes in cells with liquid electrolyte to determine their phase evolution and several equilibrium potentials vs. Li + /Li. The room temperature equilibrium redox potential of the In−Li electrode with the favored composition (or more precisely the Li + /(In−InLi) electrode) is 0.62 V vs. Li + /Li. We then discuss the use of In−Li electrodes in solid state cells using Li 3 PS 4 as solid electrolyte and give examples on the importance of the right In/Li ratio of the electrode. While the right In/Li ratio enables stable lithium insertion/deinsertion in symmetrical cells for at least 100 cycles, too much lithium in the electrode leads to a drop in redox potential combined with a rapid build‐up of interface resistance.
No takes yet. Share an insight, caveat, or question.
Santhosha et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: