Answers are grounded in this paper and cite their sources.
A highly conductive and electrochemically stable dual-salt solid polymer electrolyte (SPE) for a high-capacity cathode was developed. A phase-diagram approach was adopted to provide rational guidance for achieving a high ionic conductivity (over 1.76 mS/cm at 30 °C). The synergy of combining different salts rendered superior electrochemical stability to the SPE with an electrochemical window from 0 to 5 V (vs Li+/Li) in linear sweep voltammetry and up to 4.15 V in lithium metal batteries (LMBs). The SPE exhibited outstanding long-term stability performance in lithium plating/stripping experiments under current densities from 0.08 to 0.5 mA/cm2. The solid-state lithium metal batteries (with an LiNi0.8Co0.15Al0.05O2, NCA, cathode) exhibited initial capacities of 165 mAh/g at a rate of 0.1 C and 113 mAh/g at a rate of 1 C at 30 °C. The average Coulombic efficiency of solid-state batteries was over 99.99% in the first 1000 cycles at a rate of 1 C, and the capacity retention was 66% after 1000 cycles. In addition, the per cycle capacity fading after the initial 100 cycles was only 0.017%/cycle. The results demonstrate that the SPE is a promising candidate electrolyte for a high-energy-density solid-state lithium metal battery.
No takes yet. Share an insight, caveat, or question.
Liang et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: