Answers are grounded in this paper and cite their sources.
In recent years, selective metallization on polymer surfaces has attracted considerable attention due to its excellent properties and wide applications. This paper reports that copper phosphate (Cu₃(PO₄)₂) or nickel phosphate (Ni₃(PO₄)₂) was selected as laser-active material to successfully fabricate metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were utilized to characterize the interaction mechanism between a nanosecond-pulsed laser (355 and 1064 nm wavelengths) and Cu₃(PO₄)₂ or Ni₃(PO₄)₂. It was found that after 355 or 1064 nm laser activation with appropriate parameters, Cu⁺ was generated from Cu₃(PO₄)₂, and NiO was generated from Ni₃(PO₄)₂. At the same time, Cu⁺ or NiO adsorbed on the porous sponge-like microstructure of modified polycarbonate (PC), respectively, and acted as catalytic active centers to realize selective copper deposition in the laser-activated zone. Furthermore, the obtained copper layers were confirmed to possess good selectivity, electrical conductivity, and high adhesion strength (the highest grade of 5B). Moreover, from comparisons of Cu₃(PO₄)₂ with Ni₃(PO₄)₂ and of 355 nm laser activation with 1064 nm laser activation, the 1064 nm laser activation of Cu₃(PO₄)₂ produced the most catalytic seeds (Cu⁺) and had the best catalytic effect.
No takes yet. Share an insight, caveat, or question.
Xiang et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: