Highly Efficient 17.6% Tin–Lead Mixed Perovskite Solar Cells Realized through Spike Structure

This is the authors' abstract. We don't add key points for this paper.

Frequently observed high Voc loss in tin-lead mixed perovskite solar cells is considered to be one of the serious bottle-necks in spite of the high attainable Jsc due to wide wavelength photon harvesting. An amicable solution to minimize the Voc loss up to 0.50 V has been demonstrated by introducing an n-type interface with spike structure between the absorber and electron transport layer inspired by highly efficient Cu(In,Ga)Se₂ solar cells. Introduction of a conduction band offset of ∼0.15 eV with a thin phenyl-C61-butyric acid methyl ester layer (∼25 nm) on the top of perovskite absorber resulted into improved Voc of 0.75 V leading to best power conversion efficiency of 17.6%. This enhancement is attributed to the facile charge flow at the interface owing to the reduction of interfacial traps and carrier recombination with spike structure as evidenced by time-resolved photoluminescence, nanosecond transient absorption, and electrochemical impedance spectroscopy measurements.