Answers are grounded in this paper and cite their sources.
Using a thermogravimetric analyzer (TGA), Fe-10Cr steel was oxidized in dry air and in a mixed atmosphere of air and water vapor at a relative humidity of 50% and a temperature of 800-1200 °C for 1 h. The oxidation weight gain curves under the two atmospheres were drawn, the oxidation activation energy was calculated, and the phase and cross-sectional morphology of the iron oxide scales were analyzed and observed by X-ray diffractometry (XRD) and optical microscopy (OM). The results showed that when the oxidation temperature was 800 °C, the spheroidization of Fe-10Cr steel occurred, and the oxidation kinetics conformed to the linear law. At 900-1200 °C, the oxidation kinetics followed a linear law in the preliminary stage and a parabolic law in the middle and late stages. In an air atmosphere, when the oxidation temperature reached 1200 °C, Cr₂O₃ in the inner oxide layer was partially ruptured. In an atmosphere with a water vapor content of 50%, Cr₂O₃ at the interface reacted with H₂O to generate volatile CrO₂(OH)₂, resulting in a large consumption of Cr at the interface. At the same time, a large number of voids and microcracks appeared in the iron oxide layer, which accelerated the entry of water molecules into the substrate, as well as the oxidation of Fe-10Cr steel, and caused the iron oxide scales to fall off. Due to the volatilization of Cr₂O₃ and the conversion from internal oxidation to external oxidation, the internal oxidation zone (IOZ) of Fe-10Cr steel under water vapor atmosphere decreased or even disappeared.
No takes yet. Share an insight, caveat, or question.
Cheng et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: