Answers are grounded in this paper and cite their sources.
The influence of sensitization on the precipitation behaviour and environmentally assisted cracking (EAC) of AA5083 alloy with the –H128 temper have been investigated. 80 °C/500 h and 80 °C/1000 h sensitized specimens exhibit discontinuous Mg-rich precipitates along the grain boundaries, whereas almost continuous β′ phase is present along the grain boundaries in the 175 °C/100 h sensitized material. EAC susceptibility increases with increasing exposure time and elevated temperature. The relationship between nitric acid mass loss test (NAMLT) values and mechanical test results indicates that specimens with a NAMLT value greater than 25 mg/cm2 exhibit severe EAC. The test environment affects the degree of EAC due to the combined effects of anodic dissolution at the crack tip, hydrogen evolution, and hydrogen embrittlement. AA5083-H128 exhibits lower EAC susceptibility than AA5083-H131, likely due to its lower yield strength. High yield strength can produce more Mg-rich precipitates after sensitization, increase the constraint of the crack tip material and accelerate the diffusion rate of H atoms in the process zone of the crack tip.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: