Answers are grounded in this paper and cite their sources.
Two mechanistically different modes of EIC have been identified using high-resolution X-ray computed tomography and scanning electron microscopy (SEM) in sensitized AA5083-H131 that had been pre-exposed to 0.6M NaCl prior to interrupted slow strain rate testing (SSRT) in the short transverse direction while exposed to laboratory air(50% RH). One mode, shown to propagate when local stress intensity factors are in the range of 4 to 12-15 MNm-3/2, is the well-known ‘classic’ form of intergranular stress corrosion cracking, Type-1 cracking, which would not initiate and propagate in dry air, irrespective of pre-exposure or sensitization. The second mode of cracking, identified presently as Type-2 cracking, is associated with sudden load-drops occurring after the UTS during SSRT. Type-2 cracking propagates at higher local stress intensity factors (above 12-15 MNm-3/2) with significantly higher average growth rates than Type-1 cracking, involves the sudden simultaneous mechanical linkage of multiple fully-isolated regions of damage, pre-determined during pre-exposure to NaCl solution and generated during straining in laboratory air. Differences in the extent of Type-2 cracking for pre-exposed samples tested in ‘dry’ air compared to laboratory air (50% RH) were marked, with that in dry air being limited to isolated patches. High-resolution 3D tomography and detailed SEM has been used to distinguish these two mechanistically different modes of EIC. Implications for a role of hydrogen embrittlement during EIC are discussed.
No takes yet. Share an insight, caveat, or question.
Holroyd et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: