This is the authors' abstract. We don't add key points for this paper.
TiO 2 nanoparticles (NPs), 3 nm in size, were injected inside a very-low-pressure O 2 plasma reactor using a liquid injector and following an iterative injection sequence. Simultaneously, hexamethyldisiloxane (HMDSO) vapor precursor was added to create a SiO 2 matrix and a TiO 2 –SiO 2 nanocomposite (NC) thin film. Both the liquid injection and vapor precursor parameters were established to address the main challenges observed when creating NCs. In contrast to most aerosol-assisted plasma deposition processes, scanning/transmission electron microscopy (S/TEM) indicated isolated (i.e. non-agglomerated) NPs distributed in a rather uniform way in the matrix. The fraction of the TiO 2 NPs inside the SiO 2 matrix was estimated by SEM, spectroscopic ellipsometry (SE), and x-ray photoelectron spectroscopy. All techniques provided coherent values, with percentages between 12% and 19%. Despite the presence of TiO 2 NPs, SE measurements confirmed that the plasma-deposited SiO 2 matrix was dense with an optical quality similar to the one of thermal silica. Finally, the percentage of TiO 2 NPs inside the SiO 2 matrix and the effective refractive index of the NCs can be tuned through judicious control of the injection sequence.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Mitronika et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: