Answers are grounded in this paper and cite their sources.
The stability of the horizontal interface between conducting and non-conducting fluids under the influence of an initially uniform vertical electric field is discussed. To produce such a field when the conducting fluid is the heavier it is imagined that a large horizontal electrode is immersed in the non-conducting fluid. As the field increases the part of the interface below the electrode rises till at a voltage V , which depends on the interfacial tension, the height of the electrode above the interface and the density difference, the interface becomes unstable for vertical displacements Z which satisfy the equation (δ²/δ x² + δ²/δ y²+k²) Z=0. The value of k consistent with the lowest value of V is found. When the electrode is situated above the interface at less than a certain distance the lowest value of V is attained when k = 0 so that the horizontal extent of an unstable crest is likely to be great. As the electrode height increases above this critical value k increases and the unstable crests become more closely spaced till an upper limiting value of k is obtained. Experiments made with several pairs of fluids verify these theoretical conclusions. In some cases sparking occurs before the potential V is reached, but in others, air at atmospheric pressure over water, for instace, the instability occurs first and the jet of water which results permits the passage of a spark which may inhibit further development of the instability. The physical condition which determines the sparking voltage to a fluid may therefore be very different from that which is operative between solid electrodes. This consideration might be relevant to the performance of power-line insulators in wet weather.
No takes yet. Share an insight, caveat, or question.
Taylor et al. (1965) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: