To improve the anti-slip performance and energy-efficient torque coordination of four-wheel-drive articulated tractors operating in hilly and mountainous terrains, this study proposes an integrated control framework that combines a 7-DOF tractor dynamics model, a GA-optimized fuzzy slip-ratio controller, and a three-level dynamic torque allocation strategy. First, a control-oriented full-vehicle dynamics model is established by integrating tractor body dynamics, wheel rotational dynamics, and the Dugoff tire model. Then, a fuzzy slip-ratio controller is designed using the slip-ratio tracking error and its rate of change as inputs, and its key parameters are optimized using a genetic algorithm. On this basis, a three-level dynamic torque allocation strategy is developed to coordinate the four in-wheel motors according to wheel-load distribution and slip-related constraints. MATLAB/Simulink (version 2023a) simulations and hardware-in-the-loop (HIL) tests are carried out to validate the proposed strategy. Under the straight-line driving condition, the RMSE of the proposed GA-fuzzy controller is reduced from 0.02716 to 0.00897. Under the steering condition, the average RMSE is reduced from 0.02079 to 0.01003. In addition, under the torque-allocation validation condition, the average four-wheel RMSE is reduced from 0.29632 under equal torque allocation to 0.02159 under the proposed three-level dynamic torque allocation strategy. The results indicate that the proposed method can effectively maintain the slip ratio near its target value, suppress excessive slip and redundant torque output, and improve the anti-slip and energy-efficient performance of articulated tractors. More importantly, the study provides an integrated control framework that unifies GA-optimized slip regulation and three-level torque coordination specifically for four-wheel-drive articulated tractors.
Xu et al. (Wed,) studied this question.