Risk of Exposure to Mineral and Asbestos Fibres at a Municipal Solid Waste Landfill: Findings from Systematic Monitoring

Municipal solid waste (MSW) landfills are seldom regarded as potential sources of airborne mineral fibres, notwithstanding the possible presence of legacy asbestos-containing materials within mixed waste streams. Prolonged exposure to asbestos fibres is well established as causally associated with severe adverse health outcomes, prompting stringent regulatory measures across the European Union, most recently reinforced by Directive (EU) 2023/2668 amending Directive 2009/148/EC on the protection of workers from the risks related to asbestos exposure. This study presents systematic annual monitoring of airborne mineral fibres (MinFib), including asbestos fibres (AsbFib), conducted between 2019 and 2025 at an MSW landfill in the Czech Republic. Personal air sampling targeted heavy equipment operators as the most exposed occupational group and was conducted in accordance with established occupational hygiene principles. Fibre identification and quantification were carried out using Scanning Electron Microscopy coupled with Energy-Dispersive X-ray analysis (SEM/EDX) according to accredited laboratory internal standard operating procedures (SOPs). Across all monitoring campaigns, asbestos fibre concentrations remained below the analytical detection limits, including during handling of asbestos-containing materials. However, the analytical sensitivity appears to be within the range relevant to the current EU occupational exposure limit (0.01 fibres/cm3), potentially limiting the ability to identify very low-level exposures. These findings indicate that occupational exposure under routine operational conditions was below analytical detection limits, suggesting a low exposure potential. However, non-detectable results should be interpreted as method-limited rather than as indicating that exposure did not occur. Continued monitoring using more sensitive analytical approaches is therefore warranted.