Answers are grounded in this paper and cite their sources.
This review highlights electrochemical machining features in industry, revealing its efficiency and limitations.
Electrochemical machining was, is and will be widely applied in industry, because of its advantages: high metal removal, good surface layer quality without tool wear. The first applications took place in case of sinking, where detail shape is obtained as electrode-tool shape reproduction in a workpiece. The results of the process mainly depend on optimal electrolyte flow and are limited by temperature and hydrogen concentration increase. Because of these problems the pulse ECM process was worked out. In PECM process limitations of temperature and hydrogen concentration were overcome, accuracy increased, however metal removal rate was significantly decreased. The next way of overcoming process limitations was the advanced kinematic (milling) and simple cylindrical electrode tool shape introduction. Here the shape of a workpiece is obtained as a result of electrode-tool trajectory reproduction and problem of electrode-tool correction doesn’t exist. Practical applications of this way of ECM machining in case of macro details were rather limited to surface smoothing because o low metal removal rate. This way of machining is widely applied in case of micro-details (D< 1mm) manufacturing. Here ECM wire cutting operation have their applications. In the paper will be presented: general problems of ECM process modeling and technological process designing. Examples of ECM process practical applications will be also presented.
No takes yet. Share an insight, caveat, or question.
Adam Ruszaj (2021) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: