Answers are grounded in this paper and cite their sources.
Evaluates the mechanical performance and durability of sisal-fiber-reinforced composites, indicating their viability for long-term structural applications.
Reinforced concrete structures must balance immediate structural performance with long-term durability against environmental degradation, particularly carbonation-induced corrosion. While traditional cast-in-place concrete covers serve as the primary barrier, their substitution with prefabricated permanent formworks made of fiber-reinforced cementitious composites often fails to provide the necessary protective qualities required for aggressive environments. This study evaluates the durability and mechanical behavior of sisal-fiber-reinforced cementitious composites specifically engineered for use as permanent formwork. Short sisal fibers, treated by hornification to enhance dimensional stability and fiber–matrix adhesion, were incorporated at dosages of 2%, 4%, and 6% by weight. The experimental program included tests for water absorption, ultrasonic pulse velocity, axial compression, three-point flexural strength, and accelerated carbonation. The results indicated that composites with 2% and 4% of fibers exhibited reduced water absorption, sorptivity, compressive strength, and modulus of elasticity compared to the reference cement matrix. Residual stress values further demonstrated that the composites maintain significant post-cracking strength and stress transfer capacity, confirming their viability for structural elements. Although sisal-fiber-reinforced cementitious composites exhibit higher porosity and water absorption than conventional concrete used as reinforcement cover, they show sufficient resistance to carbonation to ensure a service life exceeding 50 years for reinforced concrete elements.
No takes yet. Share an insight, caveat, or question.
Parente et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: