Answers are grounded in this paper and cite their sources.
To investigate the impact of rock heterogeneity and flowrate on reaction rates and dissolution dynamics, four millimetre-scale Silurian dolomite samples were pre-screened based on their physical heterogeneity, defined by the simulated velocity distributions characterising each flow field. Two pairs of cores with similar heterogeneity were flooded with supercritical carbon-dioxide (scCO 2 ) saturated brine under reservoir conditions, 50 °C and 10 MPa, at a high (0.5 ml/min) and low (0.1 ml/min) flowrate. Changes to the pore structure brought about by dissolution were captured in situ using X-ray microtomography (micro-CT) imaging. Mass balance from effluent analysis sh owed a good agreement with calculations from imaging. Image calculated reaction rates (r eff ) were 5-38 times lower than the corresponding batch reaction rate under the same conditions of temperature and pressure but without mass transfer limitations. For both high (Péclet number = 2600-1200) and low (Péclet number = 420-300) flow rates, an impact of the initial rock heterogeneity was observed on both reaction rates and permeability-porosity relationships.
No takes yet. Share an insight, caveat, or question.
Al‐Khulaifi et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: