Estimating ground motion parameters at an unsampled site is challenging for seismologists and engineers alike. An attempt is made to apply Kriging interpolation to estimate peak ground accelerations at specific nuclear power plant sites. However, issues such as data quality and Kriging assumptions pose challenges to how practical and reasonable Kriging interpolation results may be in terms of estimating ground motion parameters. Peak ground acceleration data from the 2016 Gyeongju and 2017 Pohang earthquakes were taken from a local seismological agency. Peak ground acceleration, logarithms of the peak ground acceleration, and residuals between the recorded data and global and local ground motion models were used to select and derive empirical variogram models. The leave-one-out cross-validation process suggested estimating peak ground acceleration residuals from a locally developed ground motion model using an Exponential variogram model. Kriging estimates were compared to a site-specific ground motion model. These estimates appeared reasonable at one site but were significantly off at the other site. On the whole, Kriging estimates were lower than ground motion model predictions. When viewed relative to the nearest recordings, Kriging estimates appeared inconsistent across the two earthquake events. A nearest neighbor approach to computing Kriging estimates suggested a minimum of five data points but much more for modeling an empirical variogram. Results also suggest focusing on validation processes more than variogram selection. This suggests caution when applying Kriging for ground motion-related assessments in South Korea.
Yee et al. (Fri,) studied this question.