Infrared thermography provides key information for a wide range of diagnostic applications within built and natural environments. As thermal states are changing with ambient conditions, it is important to deploy thermal imaging systems and operators opportunistically. It is therefore an attractive proposition to make these systems more affordable and accessible. Low-cost thermal sensors generally produce low-resolution outputs. To increase data density across large subjects, diagnosticians may create image mosaics from multiple overlapping thermographs. The registration of individual inputs into large mosaics is aided by the acquisition of additional sensor data (photographs and depthmaps), which can provide critical spatial references. In many cases, the materials inherent to the modern built environment present challenges to traditional data registration workflows between multiple sensor streams. Mobile devices offer an opportunity to innovate in the creation of these mosaics, integrating rapid geospatial mapping functionality with radiometric thermography within a 3D context. In this paper the authors evaluate the FLIR One Pro thermal camera module along with iOS/iPhone specific rapid mapping capabilities, and present a methodology: (1) introducing a workflow for the integration of short-range (within 0.3–5 m capture distance) iPhone mobile sensor data into modeling pipelines; (2) introducing a calibration model enabling effective registration and fusion of multi-modal inputs from the iPhone mobile sensor stack and FLIR One thermographic module; and (3) detailing an alternative open-source methodology for the evaluation and translation of thermographic imagery for multi-sensor fusion. The end product of this pipeline is a 3D radiometric thermographic mosaic: a spatially continuous, textured surface model in which hundreds of individual low-resolution thermographs are fused into a single queryable output retaining full 16-bit temperature values at every point. All datasets have been made openly available and the two case studies used in this paper have been made accessible at full resolution for interactive 3D online viewing.
McAvoy et al. (Mon,) studied this question.