The global expansion of wind energy increases the need for sustainable recycling strategies for glass fiber-reinforced plastic (GFRP) from end-of-life wind turbine blades (WTB). Mechanical recycling is currently the most economically and ecologically viable technology. This study compares post-industrial (PI) waste from laminate cutoffs and post-consumer (PC) GFRP waste from end-of-life WTBs to investigate the influence of waste origin, pretreatment of shredded GFRP, different particle sizes and various matrix formulations on the tensile modulus and tensile strength of pressed bulk molding compounds produced with virgin epoxy resin. Thermogravimetric analysis showed a fiber content of up to 70 wt.%, but the resin residues on the embedded glass fibers dimmish a sufficient bonding of the new matrix system. Finer GFRP fractions consistently yielded higher tensile modulus and strength, with PI and pretreated PC materials performing best. The findings of this study demonstrate that controlled particle size distribution, impurity removal and optimized resin viscosity are key factors to achieve reliable mechanical performance and enable high-value recycling routes for glass fiber composite waste.
Purgleitner et al. (Fri,) studied this question.