With the growing demand for strategic metals and the gradual depletion of traditional metal ore deposits, coal and coal-bearing strata are regarded as potential sources of rare metals; consequently, research into the characteristics of associated elements in coal-bearing strata has become one of the primary avenues of searching for new alternative resources. To investigate the sedimentary environmental characteristics and controlling factors of the coal-bearing strata along the southern margin of the Junggar Basin, coal seams 9–15 of the Xishanyao Formation in Sulphur Gully (Early Middle Jurassic) were selected as the subject of this study. This study employed analytical techniques including industrial analysis, total sulphur analysis, X-ray powder diffraction (XRD), X-ray fluorescence spectroscopy (XRF) and inductively coupled plasma mass spectrometry (ICP-MS) to determine the mineralogical and elemental geochemical characteristics of coal samples from Seylangou mining area, specifically from coal seams 9–15 and their overlying and underlying strata. Based on analyses of elemental ratios such as Al2O3/TiO2, Sr/Ba, Rb/Sr, Ni/Co and V/(Ni + V), the source of material during the deposition of this deposit was identified, and the characteristics of the depositional environment, as indicated by palaeosalinity, palaeoclimate and redox conditions, were revealed. The results indicate that the macroscopic coal-rock types of coal seams 9–15 at the Sulphur Gully Coal Mine on the southern margin of the Junggar Basin are predominantly semi-dull to dull, with small amounts of filamentous coal and lustrous coal. The average proportion of the vitrinite group in the coal is 42.75%, the inertinite group is 51.40%, and the liptinite is 2.25%. The average content of inorganic matter in the coal is 3.60%, and the average maximum reflectance of the vitrinite group is 0.651%. The coal represents a transitional stage from low-rank to medium-rank coal, corresponding to a metamorphic stage of Grade I–II. The coal is classified as a bituminous coal with medium total moisture, very low ash, medium-volatile matter, medium-to-high fixed carbon and very low sulphur. The minerals in the coal seam are predominantly kaolinite, calcite and quartz. The major elements in the ceiling of the coal seam are dominated by SiO2, followed by Al2O3; the coal itself is dominated by CaO, SiO2 and Al2O3; and the base plate of the coal seam is dominated by Al2O3. The trace elements Cs and Bi are relatively enriched in the coal seam ceiling; Sr is relatively enriched in the coal; whilst Li, Cr and other elements are highly enriched in the coal seam base plate. The source rocks of the coal and the roof consist of deposits of felsic igneous rock (dacite), whilst the source rocks of the floor consist of deposits of intermediate igneous rock (andesite). The depositional environment ranges from marine brackish water at the base to transitional slightly brackish water and then to terrestrial freshwater at the top; the depositional climate was cold and arid, and the depositional environment was oxidising. This study provides valuable insights for further research into the elemental geochemical characteristics, sediment sources and depositional environments of the Xishanyao Formation coal seams in Liuhuangou, Xinjiang.
Xia et al. (Sat,) studied this question.