Synergistic and Antagonistic Interactions of Zinc Oxide/Magnesium Oxide Activation Systems and Ground Tire Rubber on the Properties of Styrene–Butadiene Rubber-Based Composites

This study evaluated the partial and total replacement of zinc oxide (ZnO) with magnesium oxide (MgO) in styrene–butadiene rubber (SBR) composites, as well as the incorporation of ground tire rubber (GTR), aiming to develop more sustainable elastomer formulations. Ten formulations were prepared with varying ZnO/MgO ratios (100/0 to 0/100), with and without 20 phr of GTR. The composites were characterized by particle size distribution, morphology, rheometric behavior, density, crosslink density, mechanical properties, abrasion resistance, compression behavior, and thermo-oxidative aging. The results showed that hybrid ZnO/MgO activation systems exhibited a synergistic effect, enhancing vulcanization kinetics and mechanical performance compared to single-activator systems. Total replacement of ZnO by MgO was less effective, leading to reduced crosslink density and inferior properties. The addition of GTR increased compound viscosity and altered morphology but improved abrasion and compression resistance without significantly affecting tensile strength. Aging tests indicated good thermal stability, with maintenance or improvement of tensile properties due to post-curing effects. Overall, the combination of reduced ZnO content with MgO and GTR represents a viable approach for producing SBR composites with adequate performance and lower environmental impact.