Answers are grounded in this paper and cite their sources.
Fabrication of a hollow fiber membrane improves hydrogen permeation in humid conditions, indicating better separation efficiency.
Perovskite mixed proton–electron hydrogen-permeable membranes have been widely applied in the field of membrane separation due to their 100% selectivity for hydrogen separation. La5.5WO11.25-δ-La0.87Sr0.13CrO3-δ (LWO-LSF) four-channel hollow fiber membranes were prepared by the phase inversion and sintering technique using a one-step thermal processing (OSTP) approach. The effects of temperature, feed gas concentration, sweep gas flow, permeation mode, and water vapor on hydrogen flux were systematically investigated. At 900 °C, the hydrogen permeation flux of 50% H2/N2 feed from the shell side to the lumen side was 0.613 mL·min−1·cm−2, which was 62.59% higher than that from the lumen side to the shell side. The enhanced hydrogen permeation performance is attributed to the lower gas mass transfer resistance under shell-side feeding. Under humidified conditions on the sweep side, the hydrogen flux increased by an additional 3.42%. The presence of water vapor increased the number of proton carriers, effectively enhancing proton–electron-coupled transport and thereby increasing the hydrogen permeation flux.
No takes yet. Share an insight, caveat, or question.
Jia et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: