High-voltage direct current (HVDC) transmission systems are increasingly used for long-distance power transmission and the integration of renewable energy sources. In such systems, outdoor insulators are exposed to combined electrical stresses, including steady DC voltage, transient overvoltages, and environmental contamination, which can significantly influence leakage current behaviour and insulation performance. This work presents an experimental and numerical investigation of leakage currents on artificially contaminated polymer insulators under two application-relevant HVDC operating scenarios. The first scenario considers superimposed HVDC voltage with switching impulses and very slow front overvoltages, which may occur during fault conditions in converter-based HVDC systems. The second scenario investigates electromagnetic coupling effects in a hybrid HVDC/HVAC transmission line configuration, where AC and DC conductors are installed on the same tower. Artificial contamination layers with different morphologies and conductivities are applied to the insulator surface to reproduce realistic pollution conditions. Leakage currents are measured using a high-resolution acquisition system, and the results are supported with numerical simulations based on finite-element modelling. The results show that transient overvoltages significantly increase leakage current amplitude and duration, leading to increased electrical stress on contaminated insulators. In the hybrid transmission configuration, electromagnetic coupling between AC and DC paths induces additional current components in the DC leakage current. The presented results contribute to a better understanding of leakage current behaviour under realistic HVDC operating conditions and provide useful information for insulation assessment and condition monitoring of outdoor insulators in modern HVDC transmission systems.
Hanusrichter et al. (Thu,) studied this question.