Answers are grounded in this paper and cite their sources.
The presence of fluid mud on inclined beds can cause high transport rates because of sliding due to the gravity force. In the present paper, gravity currents of fluid mud on sloping beds have been studied experimentally; velocity and concentration profiles were measured at two positions in a laboratory flume. The model fluid mud was prepared by suspending china clay in tap water; bulk densities varied from 1,050 to 1,230 kg/m 3. When the apparent viscosity of fluid mud increased markedly with sediment concentration, both turbulent and laminar flows occurred. The observed transition between these flow regimes is in agreement with a transition criterion based on the Bingham plastic rheological model, known from the literature. From the measured profiles, entrainment rates for turbulence flow and bottom shear stresses were calculated. Although entrainment rates show scatter, they are in fair agreement with other empirical data and from an entrainment model adopted in the literature. Experimental bottom friction factors for laminar flow are in agreement with values calculated using the Bingham plastic model. For turbulent flow, the friction factor seems to approach a constant value of about 3⋅10 −3.
No takes yet. Share an insight, caveat, or question.
Kessel et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: