Small unmanned aerial vehicle (UAV)-borne distributed tomographic synthetic aperture radar (TomoSAR) systems offer flexible baseline configurations and low deployment cost, making them attractive for rapid and high-resolution three-dimensional (3D) reconstruction. However, the distance between adjacent channels placed on different UAVs is relatively large due to the flight safety spacing considerations. This leads to high sidelobes in the elevation point spread function (PSF) within the reconstruction range. Meanwhile, atmospheric turbulence may cause UAVs to deviate from their predefined trajectories, making it difficult to suppress sidelobes through baseline optimization. Large baselines may also introduce spatial decorrelation between channels, which gives rise to random phase noise in the interferometric phase and further aggravates elevation ambiguity by increasing the sidelobe level of the PSF. To address this problem, this paper proposes an elevation ambiguity resolution method based on neighborhood-adaptive elevation priors. In the proposed method, a window function is constructed from reconstruction results of neighboring pixels and incorporated into the reconstruction process to suppress the interference caused by high sidelobes. In this way, the probability of correct target reconstruction is improved. The effectiveness and robustness of the proposed method are validated using both simulations and real measured data. Experimental results obtained with a C-band small UAV-borne distributed TomoSAR system show that the proposed method effectively suppresses ambiguity and enables ambiguity-free reconstruction of target buildings. Statistical analysis further demonstrates that the number of ambiguous points produced by the proposed algorithm is only one-fifth of that produced by the conventional OMP method.
Li et al. (Wed,) studied this question.