This is the authors' abstract. We don't add key points for this paper.
To enhance the mechanical properties and corrosion resistance of biodegradable Mg alloys, varying amounts of Er (0, 0.5, 1, 1.5, 2, and 3 wt%) are added to the Mg-1Zn-0.3Zr alloy in this study. The phases of Mg 3 Er 2 Zn 3 and MgEr are observed after Er doping. As the Er content increases, there is a progressive reduction in grain size, accompanied by a gradual increase in the volume fraction of second phases. The mechanical properties and corrosion resistance initially improve, followed by a gradual decline as the Er content continues to rise. The alloy with 1.5 wt% Er exhibits superior overall performance. Compared with the Mg-1Zn-0.3Zr alloy, the yield strength, ultimate tensile strength, and elongation increase by 18.3%, 34.3%, and 42%, respectively, while the corrosion rate decreases by 36.4%. The enhancement in mechanical properties is attributed to grain refinement and the strengthening of second phases. The improvement in corrosion resistance is linked to the formation of Er 2 O 3 , an elevated potential, and a lower potential difference between the second phases and Mg matrix. Furthermore, it is confirmed that Ca and P ions are enriched in the outer layer of corrosion products. • Er addition results in a progressive reduction in grain size, from 153 μm to 87 μm. • Addition of 1.5% Er elevates the alloy potential and reduces the potential difference between Mg matrix and second phases. • ZK-1.5Er alloy demonstrates the superior mechanical properties and bio-corrosion resistance. • Ca and P concentrate in the outer layer of corrosion product for the alloys in SBF. • Formation of Er 2 O 3 results in a passivation and dense corrosion film.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
He et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: